{"id":22100961,"date":"2026-11-11T09:01:00","date_gmt":"2026-11-11T14:01:00","guid":{"rendered":"https:\/\/flikt.ai\/?p=0&#038;flikt-draft=multifamily-drawing-review"},"modified":"2026-11-10T13:14:45","modified_gmt":"2026-11-10T18:14:45","slug":"multifamily-drawing-review","status":"publish","type":"post","link":"https:\/\/flikt.ai\/es\/multifamily-drawing-review\/","title":{"rendered":"How Do You Review Multifamily Construction Drawings Before Pricing?"},"content":{"rendered":"<p><strong>Short answer:<\/strong> A multifamily drawing review checks the set against itself before anyone prices it: each unit type against every floor and mirror it repeats on, the typical floors against the podium transfer, the rated corridor against the door and wall schedules, and the plumbing and mechanical stacks against the framing. <strong>Repetition is what makes multifamily different: one conflict in a typical unit plan is built once per unit, so it is found on paper or found dozens of times in the field.<\/strong><\/p>\n<p>A 300-unit building might have eight unit types. Each one is drawn once at enlarged scale, mirrored on half the floors, stacked five stories high over a concrete podium, and then drawn again by the structural, mechanical, plumbing and electrical engineers on their own typical floor plans. A bathroom wall that moved four inches on the architectural unit plan and nowhere else is one line on one sheet. It is also two hundred bathrooms.<\/p>\n<p>That is the whole reason multifamily sets need their own kind of review. The conflicts are mostly the same kinds you find on any building. The difference is the multiplier, and where the set is most likely to break: at the repeated unit, at the podium, at the rated corridor and in the vertical stacks.<\/p>\n<p>This is what to check, in what order, on a 2D PDF set before pricing or GMP, written from the builder&#8217;s side of the table.<\/p>\n<h2>What a multifamily drawing review actually covers<\/h2>\n<p>A multifamily drawing review is a coordination read of the full set: architectural, structural, mechanical, plumbing, electrical, fire protection, civil and landscape, checked against each other and against themselves. It is not permit plan review, which is the building department checking code compliance, and it is not a constructability review of means and methods, though it overlaps with both. The question it answers is narrower and more expensive: does the set describe one building, or several slightly different ones?<\/p>\n<p>In our benchmark of 523 adjudicated coordination conflicts across 19 real plan sets totalling 5,259 sheets, nine of the sets are multifamily work, including an adaptive reuse and a lobby renovation. Those nine account for 357 of the 523 conflicts and about 4,100 of the sheets. Multifamily is most of what we read, and the patterns below come from it.<\/p>\n<p>Across the whole study, <a href=\"https:\/\/flikt.ai\/architectural-electrical-drawing-conflicts\/\">Architectural against Electrical<\/a> is the most common interface at 11.1% of conflicts, <a href=\"https:\/\/flikt.ai\/architectural-mechanical-drawing-conflicts\/\">Architectural against Mechanical<\/a> is second at 9.4%, and architectural is involved in about half of everything found. About one conflict in four is a sheet disagreeing with another sheet of its own discipline.<\/p>\n<h2>Why multifamily sets break where they do<\/h2>\n<p>Three things are true of almost every multifamily set, and each one creates its own class of conflict.<\/p>\n<ul>\n<li><strong>The unit is drawn many times by many people.<\/strong> The architect draws the enlarged unit plan, the floor plan it sits on, the RCP and the interior elevations. Each engineer redraws the same unit on their own sheets. A late change to the unit, a bigger closet or a moved bathroom, has to reach every one of those drawings and every mirrored version of them.<\/li>\n<li><strong>The building changes structure partway up.<\/strong> Wood or light-gauge framing over a concrete podium means the column grid, the plumbing routing and the duct risers all have to make a transition at the transfer level. What works on the typical floor often does not line up with what the podium can carry or what the garage below can clear.<\/li>\n<li><strong>The rules change from unit to unit.<\/strong> Accessible units, rated corridors, rated unit demising walls and dwelling unit separations all apply to some walls and doors and not others. Each of those is a tag on a plan that has to match a schedule, a legend and a life safety plan.<\/li>\n<\/ul>\n<h2>The seven places to look first in a multifamily drawing review<\/h2>\n<p>If you only have a day with the set, spend it here. These are where the multiplier is largest.<\/p>\n<h3>1. Each unit type against every floor it appears on<\/h3>\n<p>Lay the enlarged unit plan over the floor plans where that unit appears. Check the demising wall positions, the door locations, the plumbing wall and the overall unit dimensions. Then do it again for the mirrored unit, which is a separate drawing and a separate chance for the same unit to be drawn two ways. Most of the <a href=\"https:\/\/flikt.ai\/architectural-drawing-inconsistencies\/\">internal architectural inconsistencies<\/a> on a multifamily set live here.<\/p>\n<h3>2. The engineers&#8217; typical unit against the architect&#8217;s<\/h3>\n<p>The mechanical, plumbing and electrical typical unit plans are each drawn on a background that was current when the engineer got it. Compare fixture locations, the water heater or fan coil closet, the panel location, the bath exhaust and the dryer vent route against the current architectural unit. A closet that moved on the A sheet and not on the M sheet is a fan coil with nowhere to go, repeated on every floor.<\/p>\n<h3>3. The podium transfer<\/h3>\n<p>Every plumbing stack, duct riser and bearing wall on the typical floors has to land somewhere at the podium. Check the stacks on the plumbing risers against the transfer beams and slab on the structural sheets, and check where the offsets in the garage or retail level are drawn. Offsets that appear on nobody&#8217;s sheet are the classic multifamily RFI. Mechanical against structural conflicts outnumber electrical against structural about nine to one in our data, and the podium is where they concentrate.<\/p>\n<h3>4. The rated corridor<\/h3>\n<p>Unit entry doors, corridor walls, the trash chute, the electrical and telecom closets and every duct or pipe that penetrates the corridor wall all have to agree between the floor plan, the life safety plan, the door schedule, the wall type legend and the mechanical plans. A corridor door scheduled with the wrong rating, or a duct crossing a rated wall with no damper shown, is repeated on every residential floor.<\/p>\n<h3>5. Accessible units against the unit plans that carry them<\/h3>\n<p>The <a href=\"https:\/\/www.justice.gov\/crt\/fair-housing-act-1\" target=\"_blank\" rel=\"noopener\">Fair Housing Act&#8217;s design and construction requirements<\/a> apply to new multifamily buildings of four or more units first occupied after March 13, 1991, and cover things like door widths, accessible routes through the unit, reinforcement in bathroom walls for grab bars, and switches, outlets and thermostats in reachable locations. On top of that, the building code sets how many units must be fully accessible. Check that the units designated accessible on the life safety or code sheets are the units drawn with the accessible layout, and that the electrical and mechanical sheets put the controls where the accessible plan needs them. That last check is an Architectural against Electrical conflict, which is the most common pair there is.<\/p>\n<h3>6. Vertical stacks against the framing<\/h3>\n<p>Plumbing chases, bath exhaust, kitchen exhaust and dryer vents run up through the building. Check each stack on the riser diagrams against the floor framing plans for joists, headers and bearing walls in the way, and against the exterior elevations for where the terminations actually land on the facade.<\/p>\n<h3>7. The roof, the amenity level and the ground floor<\/h3>\n<p>These are the non-typical floors, so they get drawn once and checked least. Rooftop condensers against the roof framing and the structural loads, the amenity kitchen and fitness room against the MEP plans, and the leasing office, mail room and lobby against the civil and site drawings are each one-off conditions that the rest of the set never repeats, which is exactly why they drift.<\/p>\n<h2>What a missed conflict costs on a multifamily job<\/h2>\n<p>Processing a single RFI runs <a href=\"https:\/\/flikt.ai\/what-does-an-rfi-cost\/\">about $1,080 in loaded review time<\/a> across the builder, the architect and the engineers, and projects average roughly ten RFIs per $1 million of construction value. On a $60 million building, that is around 600 RFIs before the multiplier does anything. A conflict found in the field instead of on paper averages around $1,500.<\/p>\n<p>Those figures are per conflict. In a typical unit, the conflict is per unit. A plumbing wall that does not match the framing is one RFI and one revised sheet if it is caught before pricing. Caught at rough-in, it is a fix on every floor that has been framed, and the framing sub is usually ahead of the plumber.<\/p>\n<p>The schedule cost follows the same shape. A bad condition on the typical floor holds up the floor, and the floors are the schedule. That is the case for reading the set before you <a href=\"https:\/\/flikt.ai\/review-drawings-before-gmp\/\">review drawings before GMP<\/a>, not after.<\/p>\n<h2>How to run the review on a PDF set<\/h2>\n<p>Pricing on multifamily work almost always happens on 2D PDFs, before any coordinated model exists. You can do all of this without one.<\/p>\n<ul>\n<li><strong>1. Confirm every sheet is on the current issue.<\/strong> Check revision blocks against the sheet index, discipline by discipline. A consultant on an older background explains a whole cluster of conflicts on its own.<\/li>\n<li><strong>2. Build a unit-type matrix.<\/strong> List each unit type, its mirror, and every floor and sheet it appears on, in every discipline. This is your checklist for steps 3 and 4.<\/li>\n<li><strong>3. Check each unit type in every discipline.<\/strong> Architectural unit plan against the floor plans, then against the M, P and E typical units. Do the mirrored units separately.<\/li>\n<li><strong>4. Walk the podium transfer.<\/strong> Every stack and riser from the typical floors should land on something on the structural transfer sheets, with any offset drawn by someone.<\/li>\n<li><strong>5. Walk the rated corridor across five documents.<\/strong> Floor plan, life safety plan, door schedule, wall type legend and mechanical plans should agree at every door, wall and penetration.<\/li>\n<li><strong>6. Check accessible units and their controls.<\/strong> Designated units on the code sheets should match the accessible layouts on the unit plans and the control locations on the electrical and mechanical sheets.<\/li>\n<li><strong>7. Read the non-typical floors on their own.<\/strong> Roof, amenity, lobby and ground floor get a full pass, because nothing else in the set repeats them.<\/li>\n<li><strong>8. Read the specifications against the drawings.<\/strong> Fixture, equipment and assembly callouts on the plans should match the spec sections they point to. See <a href=\"https:\/\/flikt.ai\/check-specifications-against-drawings\/\">how to check specifications against drawings<\/a>.<\/li>\n<li><strong>9. Write every finding with both sheet numbers and the count.<\/strong> &#8220;A-411 Unit B2 plumbing wall at 5&#8242;-2&#8243; from demising wall where P-411 shows 4&#8242;-10&#8243;, repeats on Levels 2 to 6, 40 units&#8221; gets answered and priced. &#8220;Check the B2 plumbing wall&#8221; does not.<\/li>\n<\/ul>\n<h2>Why clash detection alone does not cover it<\/h2>\n<p>3D clash detection is useful once there is a coordinated model, and on multifamily work that is usually after the GMP is set. It compares geometry. It does not compare a door schedule to a corridor door tag, an accessible unit designation to the unit drawn, or an enlarged unit plan to the floor plan it repeats on. Those are document conflicts, and they are a large share of what a multifamily set gets wrong. The PDF read is what catches them at bid, which is why <a href=\"https:\/\/flikt.ai\/clash-detection-without-bim\/\">clash detection without BIM<\/a> matters on this building type more than most.<\/p>\n<h2>How flikt.ai\/ handles it<\/h2>\n<p>flikt.ai\/ reads the whole set, every sheet against every other sheet including sheets of the same discipline, plus the schedules and any specifications, and returns a report of the contradictions with page references and a severity rating on every finding, the same day. It <a href=\"https:\/\/flikt.ai\/what-we-check\/\">classifies findings across 16 disciplines<\/a> and works directly from 2D PDFs, so there is no model to build and nothing to install.<\/p>\n<p>Pricing is published, and every listed price is a ceiling: checkout prices from the pages you actually upload. A multifamily or mixed-use set of around 800 pages is $3,799 for a Coordination Review, and a full CD set of around 250 pages is $1,049. After the first review, Project Coverage runs monthly on that project, $950 a month at the 800 page size, and covers a revision review of every revised set while the job is live, backchecking every earlier finding. Teams moving several sets through milestones tend to land on a Review Desk Pro at $1,299 a month. Current tiers are on the <a href=\"https:\/\/flikt.ai\/pricing\/\">pricing page<\/a>, and you can <a href=\"https:\/\/flikt.ai\/try\/\">get a free preview<\/a> on your own set first.<\/p>\n<p>Reports are recommended as a supplement to professional review, not a replacement for it.<\/p>\n<h2>Frequently asked questions<\/h2>\n<h3>What should I check first when reviewing multifamily drawings?<\/h3>\n<p>Start with each unit type against every floor and mirror it appears on, in every discipline. A conflict in a typical unit repeats once per unit, so that is where one finding is worth the most. Then walk the podium transfer, the rated corridor and the vertical plumbing and mechanical stacks.<\/p>\n<h3>How is a multifamily drawing review different from a commercial one?<\/h3>\n<p>The conflicts are mostly the same kinds. The difference is repetition and structure: the same unit is drawn many times by several consultants and mirrored, the building usually changes structural system at a podium, and rated corridors and accessible units put different rules on different walls and doors. A single missed conflict gets built dozens or hundreds of times.<\/p>\n<h3>What are the most common conflicts in multifamily plan sets?<\/h3>\n<p>Across 523 adjudicated conflicts in 19 real plan sets, Architectural against Electrical is the most common interface at 11.1% and Architectural against Mechanical is second at 9.4%. Architectural is involved in about half of everything. On multifamily work, the typical unit plans drifting from the engineers&#8217; typical units and from the floor plans are where most of those show up.<\/p>\n<h3>Who is responsible for coordinating multifamily construction drawings?<\/h3>\n<p>The architect of record usually coordinates the design team and owns the architectural set, and each engineer of record owns their discipline. In practice the developer and the general contractor carry the cost when a conflict is found in the field, so most builders run their own review before pricing and send findings back as RFIs.<\/p>\n<h3>Do I need a BIM model to review a multifamily set?<\/h3>\n<p>No. Most multifamily pricing happens on 2D PDFs before a coordinated model exists, and many of the costly conflicts are document conflicts a model would not catch: schedules against tags, accessible unit designations against layouts, enlarged unit plans against floor plans. Automated review tools like flikt.ai\/ run the cross-check on the PDF set directly.<\/p>\n<h3>When should a multifamily drawing review happen?<\/h3>\n<p>Before pricing or GMP, on a substantially complete set with all disciplines. That is when a conflict costs one RFI and one revised sheet. After that, re-check each revised issue against the earlier findings, because ASIs and bulletins on a repeated unit can reintroduce the same conflict on every floor.<\/p>\n<h3>How long does it take to review a multifamily drawing set?<\/h3>\n<p>A thorough manual cross-check of a large multifamily set takes an experienced reviewer days to weeks, and it is rarely complete because nobody has time to check every unit type in every discipline. Automated review reads every sheet against every other sheet and returns findings the same day.<\/p>\n<p><script type=\"application\/ld+json\">{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What should I check first when reviewing multifamily drawings?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Start with each unit type against every floor and mirror it appears on, in every discipline. A conflict in a typical unit repeats once per unit, so that is where one finding is worth the most. Then walk the podium transfer, the rated corridor and the vertical plumbing and mechanical stacks.\"}}, {\"@type\": \"Question\", \"name\": \"How is a multifamily drawing review different from a commercial one?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The conflicts are mostly the same kinds. The difference is repetition and structure: the same unit is drawn many times by several consultants and mirrored, the building usually changes structural system at a podium, and rated corridors and accessible units put different rules on different walls and doors. A single missed conflict gets built dozens or hundreds of times.\"}}, {\"@type\": \"Question\", \"name\": \"What are the most common conflicts in multifamily plan sets?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Across 523 adjudicated conflicts in 19 real plan sets, Architectural against Electrical is the most common interface at 11.1% and Architectural against Mechanical is second at 9.4%. Architectural is involved in about half of everything. On multifamily work, the typical unit plans drifting from the engineers' typical units and from the floor plans are where most of those show up.\"}}, {\"@type\": \"Question\", \"name\": \"Who is responsible for coordinating multifamily construction drawings?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The architect of record usually coordinates the design team and owns the architectural set, and each engineer of record owns their discipline. In practice the developer and the general contractor carry the cost when a conflict is found in the field, so most builders run their own review before pricing and send findings back as RFIs.\"}}, {\"@type\": \"Question\", \"name\": \"Do I need a BIM model to review a multifamily set?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. Most multifamily pricing happens on 2D PDFs before a coordinated model exists, and many of the costly conflicts are document conflicts a model would not catch: schedules against tags, accessible unit designations against layouts, enlarged unit plans against floor plans. Automated review tools like Flikt.AI run the cross-check on the PDF set directly.\"}}, {\"@type\": \"Question\", \"name\": \"When should a multifamily drawing review happen?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Before pricing or GMP, on a substantially complete set with all disciplines. That is when a conflict costs one RFI and one revised sheet. After that, re-check each revised issue against the earlier findings, because ASIs and bulletins on a repeated unit can reintroduce the same conflict on every floor.\"}}, {\"@type\": \"Question\", \"name\": \"How long does it take to review a multifamily drawing set?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A thorough manual cross-check of a large multifamily set takes an experienced reviewer days to weeks, and it is rarely complete because nobody has time to check every unit type in every discipline. Automated review reads every sheet against every other sheet and returns findings the same day.\"}}]}<\/script><\/p>\n","protected":false},"excerpt":{"rendered":"<p>A multifamily drawing review checks every unit type against every floor it repeats on, then the podium, corridors and MEP stacks. Here is how to run one.<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-22100961","post","type-post","status-publish","format-standard","hentry","category-blogging"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.8 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Multifamily Drawing Review: What to Check - Flikt.AI<\/title>\n<meta name=\"description\" content=\"A multifamily drawing review checks every unit type against every floor it repeats on, then the podium, corridors and MEP stacks. Here is how to run one.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/flikt.ai\/es\/multifamily-drawing-review\/\" \/>\n<meta property=\"og:locale\" content=\"es_MX\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Multifamily Drawing Review: What to Check - Flikt.AI\" \/>\n<meta property=\"og:description\" content=\"A multifamily drawing review checks every unit type against every floor it repeats on, then the podium, corridors and MEP stacks. Here is how to run one.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/flikt.ai\/es\/multifamily-drawing-review\/\" \/>\n<meta property=\"og:site_name\" content=\"Flikt.AI\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-11T14:01:00+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/flikt.ai\/wp-content\/uploads\/2026\/10\/og-image-change-order-v5-1200x630-1.png\" \/>\n\t<meta property=\"og:image:width\" content=\"1200\" \/>\n\t<meta property=\"og:image:height\" content=\"630\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Greg Baumann\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Escrito por\" \/>\n\t<meta name=\"twitter:data1\" content=\"Greg Baumann\" \/>\n\t<meta name=\"twitter:label2\" content=\"Tiempo de lectura\" \/>\n\t<meta name=\"twitter:data2\" content=\"11 minutos\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/flikt.ai\\\/multifamily-drawing-review\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/flikt.ai\\\/multifamily-drawing-review\\\/\"},\"author\":{\"name\":\"Greg Baumann\",\"@id\":\"https:\\\/\\\/flikt.ai\\\/#\\\/schema\\\/person\\\/80c13cd41a03b2bb7d3cb46b7a2257e8\"},\"headline\":\"How Do You Review Multifamily Construction Drawings Before Pricing?\",\"datePublished\":\"2026-11-11T14:01:00+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/flikt.ai\\\/multifamily-drawing-review\\\/\"},\"wordCount\":2449,\"publisher\":{\"@id\":\"https:\\\/\\\/flikt.ai\\\/#organization\"},\"articleSection\":[\"Blogging\"],\"inLanguage\":\"es\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/flikt.ai\\\/es\\\/wp-json\\\/wp\\\/v2\\\/posts\\\/22100961\",\"url\":\"https:\\\/\\\/flikt.ai\\\/es\\\/wp-json\\\/wp\\\/v2\\\/posts\\\/22100961\",\"name\":\"Multifamily Drawing Review: What to Check - Flikt.AI\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/flikt.ai\\\/#website\"},\"datePublished\":\"2026-11-11T14:01:00+00:00\",\"description\":\"A multifamily drawing review checks every unit type against every floor it repeats on, then the podium, corridors and MEP stacks. Here is how to run one.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/flikt.ai\\\/multifamily-drawing-review\\\/#breadcrumb\"},\"inLanguage\":\"es\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/flikt.ai\\\/multifamily-drawing-review\\\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/flikt.ai\\\/multifamily-drawing-review\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/flikt.ai\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How Do You Review Multifamily Construction Drawings Before Pricing?\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/flikt.ai\\\/#website\",\"url\":\"https:\\\/\\\/flikt.ai\\\/\",\"name\":\"Flikt.AI\",\"description\":\"AI plan review and conflict detection for construction\",\"publisher\":{\"@id\":\"https:\\\/\\\/flikt.ai\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/flikt.ai\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"es\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/flikt.ai\\\/#organization\",\"name\":\"Flikt.AI\",\"url\":\"https:\\\/\\\/flikt.ai\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\\\/\\\/flikt.ai\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/flikt.ai\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/wp-site-icon-512.png\",\"contentUrl\":\"https:\\\/\\\/flikt.ai\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/wp-site-icon-512.png\",\"width\":512,\"height\":512,\"caption\":\"Flikt.AI\"},\"image\":{\"@id\":\"https:\\\/\\\/flikt.ai\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/flikt.ai\\\/#\\\/schema\\\/person\\\/80c13cd41a03b2bb7d3cb46b7a2257e8\",\"name\":\"Greg Baumann\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/c90e24286d460eea7b0ca5b021bb6c1ecbceb4c14a5d139dc55a024434c50c0b?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/c90e24286d460eea7b0ca5b021bb6c1ecbceb4c14a5d139dc55a024434c50c0b?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/c90e24286d460eea7b0ca5b021bb6c1ecbceb4c14a5d139dc55a024434c50c0b?s=96&d=mm&r=g\",\"caption\":\"Greg Baumann\"},\"description\":\"Founder and CEO of Flikt.AI, attorney and licensed general contractor. With 2,600+ multifamily units delivered through ground-up development, Greg has sat on the owner's side of the table when a missed conflict between architectural and MEP drawings turned into a six-figure change order. He understands developer economics, project budgeting, and the real consequences when plan conflicts slip through.\",\"sameAs\":[\"https:\\\/\\\/flikt.ai\\\/about\\\/\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/greg-baumann-b202261a3\\\/\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Multifamily Drawing Review: What to Check - Flikt.AI","description":"A multifamily drawing review checks every unit type against every floor it repeats on, then the podium, corridors and MEP stacks. Here is how to run one.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/flikt.ai\/es\/multifamily-drawing-review\/","og_locale":"es_MX","og_type":"article","og_title":"Multifamily Drawing Review: What to Check - Flikt.AI","og_description":"A multifamily drawing review checks every unit type against every floor it repeats on, then the podium, corridors and MEP stacks. Here is how to run one.","og_url":"https:\/\/flikt.ai\/es\/multifamily-drawing-review\/","og_site_name":"Flikt.AI","article_published_time":"2026-11-11T14:01:00+00:00","og_image":[{"width":1200,"height":630,"url":"https:\/\/flikt.ai\/wp-content\/uploads\/2026\/10\/og-image-change-order-v5-1200x630-1.png","type":"image\/png"}],"author":"Greg Baumann","twitter_card":"summary_large_image","twitter_misc":{"Escrito por":"Greg Baumann","Tiempo de lectura":"11 minutos"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/flikt.ai\/multifamily-drawing-review\/#article","isPartOf":{"@id":"https:\/\/flikt.ai\/multifamily-drawing-review\/"},"author":{"name":"Greg Baumann","@id":"https:\/\/flikt.ai\/#\/schema\/person\/80c13cd41a03b2bb7d3cb46b7a2257e8"},"headline":"How Do You Review Multifamily Construction Drawings Before Pricing?","datePublished":"2026-11-11T14:01:00+00:00","mainEntityOfPage":{"@id":"https:\/\/flikt.ai\/multifamily-drawing-review\/"},"wordCount":2449,"publisher":{"@id":"https:\/\/flikt.ai\/#organization"},"articleSection":["Blogging"],"inLanguage":"es"},{"@type":"WebPage","@id":"https:\/\/flikt.ai\/es\/wp-json\/wp\/v2\/posts\/22100961","url":"https:\/\/flikt.ai\/es\/wp-json\/wp\/v2\/posts\/22100961","name":"Multifamily Drawing Review: What to Check - Flikt.AI","isPartOf":{"@id":"https:\/\/flikt.ai\/#website"},"datePublished":"2026-11-11T14:01:00+00:00","description":"A multifamily drawing review checks every unit type against every floor it repeats on, then the podium, corridors and MEP stacks. Here is how to run one.","breadcrumb":{"@id":"https:\/\/flikt.ai\/multifamily-drawing-review\/#breadcrumb"},"inLanguage":"es","potentialAction":[{"@type":"ReadAction","target":["https:\/\/flikt.ai\/multifamily-drawing-review\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/flikt.ai\/multifamily-drawing-review\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/flikt.ai\/"},{"@type":"ListItem","position":2,"name":"How Do You Review Multifamily Construction Drawings Before Pricing?"}]},{"@type":"WebSite","@id":"https:\/\/flikt.ai\/#website","url":"https:\/\/flikt.ai\/","name":"Flikt.AI","description":"AI plan review and conflict detection for construction","publisher":{"@id":"https:\/\/flikt.ai\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/flikt.ai\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"es"},{"@type":"Organization","@id":"https:\/\/flikt.ai\/#organization","name":"Flikt.AI","url":"https:\/\/flikt.ai\/","logo":{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/flikt.ai\/#\/schema\/logo\/image\/","url":"https:\/\/flikt.ai\/wp-content\/uploads\/2026\/06\/wp-site-icon-512.png","contentUrl":"https:\/\/flikt.ai\/wp-content\/uploads\/2026\/06\/wp-site-icon-512.png","width":512,"height":512,"caption":"Flikt.AI"},"image":{"@id":"https:\/\/flikt.ai\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/flikt.ai\/#\/schema\/person\/80c13cd41a03b2bb7d3cb46b7a2257e8","name":"Greg Baumann","image":{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/secure.gravatar.com\/avatar\/c90e24286d460eea7b0ca5b021bb6c1ecbceb4c14a5d139dc55a024434c50c0b?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/c90e24286d460eea7b0ca5b021bb6c1ecbceb4c14a5d139dc55a024434c50c0b?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/c90e24286d460eea7b0ca5b021bb6c1ecbceb4c14a5d139dc55a024434c50c0b?s=96&d=mm&r=g","caption":"Greg Baumann"},"description":"Fundador y director ejecutivo de Flikt.AI, abogado y contratista general autorizado. Con m\u00e1s de 2,600 unidades multifamiliares entregadas a trav\u00e9s de desarrollos desde cero, Greg ha estado del lado del propietario cuando un conflicto no detectado entre los planos arquitect\u00f3nicos y los de ingenier\u00eda mec\u00e1nica, el\u00e9ctrica y plomer\u00eda (MEP) se convirti\u00f3 en una orden de cambio de seis cifras. Entiende la econom\u00eda de los desarrolladores, la elaboraci\u00f3n de presupuestos para proyectos y las consecuencias reales cuando se pasan por alto los conflictos en los planos.","sameAs":["https:\/\/flikt.ai\/about\/","https:\/\/www.linkedin.com\/in\/greg-baumann-b202261a3\/"]}]}},"_links":{"self":[{"href":"https:\/\/flikt.ai\/es\/wp-json\/wp\/v2\/posts\/22100961","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/flikt.ai\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/flikt.ai\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/flikt.ai\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/flikt.ai\/es\/wp-json\/wp\/v2\/comments?post=22100961"}],"version-history":[{"count":1,"href":"https:\/\/flikt.ai\/es\/wp-json\/wp\/v2\/posts\/22100961\/revisions"}],"predecessor-version":[{"id":22100966,"href":"https:\/\/flikt.ai\/es\/wp-json\/wp\/v2\/posts\/22100961\/revisions\/22100966"}],"wp:attachment":[{"href":"https:\/\/flikt.ai\/es\/wp-json\/wp\/v2\/media?parent=22100961"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/flikt.ai\/es\/wp-json\/wp\/v2\/categories?post=22100961"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/flikt.ai\/es\/wp-json\/wp\/v2\/tags?post=22100961"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}