FliktAI Resources
Insights on AI-powered plan review, MEP coordination, and reducing change orders in construction.
- Pre-Construction QA: A Practical ChecklistThe cheapest version of a construction defect is the one you find on a PDF. A conflict caught during plan review costs a markup and a coordination meeting. The same conflict caught in the field costs demolition, rework, a change order, and schedule — industry experience puts that ratio at roughly ten to one. Pre-construction… Lee más: Pre-Construction QA: A Practical Checklist
- MEP Coordination Process: A Step-by-Step GuideMEP coordination is where most construction conflicts hide — and where the cost of catching them late is highest. Mechanical, electrical, and plumbing scope cross every floor plate and touch every other discipline. When those trades coordinate well, the project runs predictably. When they don’t, the failures land as change orders, RFIs, and rework —… Lee más: MEP Coordination Process: A Step-by-Step Guide
- How to Reduce RFIs Before Construction StartsMost RFI-reduction advice focuses on processing RFIs faster — better logs, quicker turnaround, cleaner submittals. That’s workflow management. It doesn’t reduce RFI volume; it just handles the backlog more efficiently. This post is about something different: closing the drawing gaps that generate RFIs in the first place, before bid, before mobilization, before anyone touches the… Lee más: How to Reduce RFIs Before Construction Starts
- The Cost of Rework in Construction (and How to Cut It)Rework is everywhere on construction projects, and almost everyone underestimates it. The visible costs — demo, re-installation, material waste — make it onto a cost report. The invisible costs — superintendent time, crew standby, schedule compression, subcontractor premium for out-of-sequence work — mostly don’t. Add them together and rework is consistently one of the largest… Lee más: The Cost of Rework in Construction (and How to Cut It)
- The True Cost of Change Orders in ConstructionMost project teams can tell you how many change orders they’ve processed. Fewer can tell you what those change orders actually cost — not the line-item amount the owner signed, but the full freight: the overhead burned re-sequencing a schedule, the margin diluted by rework, the relationship capital spent managing a dispute. That gap between… Lee más: The True Cost of Change Orders in Construction
- Construction Document Review ChecklistA set of construction documents is never just one document. It’s an architect’s drawings, a structural engineer’s sheets, an MEP consultant’s layouts, a civil set, a project manual, and dozens of detail sheets — all produced by different teams, often on different timelines, expected to agree perfectly when field crews rely on them. They rarely… Lee más: Construction Document Review Checklist
- Constructability Review: What It Is and How to Run OneA constructability review is the structured process of asking, before construction begins: can this actually be built the way it’s drawn? It’s not a code compliance check, and it’s not a bid review. It’s a disciplined read of the construction documents — drawings, specs, and schedules — to find the conflicts, gaps, and coordination failures… Lee más: Constructability Review: What It Is and How to Run One
- The Building Plan Review Process Explained“Plan review” means two different things in construction, and conflating them is the source of a lot of confusion — and a lot of missed conflicts. The first meaning is regulatory: an Authority Having Jurisdiction (AHJ), typically a municipal building department, reviews your submitted documents for code compliance before issuing a permit. The second meaning… Lee más: The Building Plan Review Process Explained
- Do You Need BIM for Clash Detection? 2D vs 3DThe question gets asked more than people admit out loud: do we actually need a BIM model to catch conflicts before construction? The conversation usually starts with a project that doesn’t have a fully federated model — or one where the model exists but isn’t coordination-ready until after bid. Or a developer who wants answers… Lee más: Do You Need BIM for Clash Detection? 2D vs 3D
- Clash Detection Without BIM: Is It Possible?Short answer: yes — and on most projects it’s the only clash detection that happens early enough to matter. “Clash detection” has become shorthand for one specific workflow: load federated 3D models into Navisworks, Autodesk Construction Cloud, or Solibri, and let the software flag where the ductwork runs through a beam. That workflow is real… Lee más: Clash Detection Without BIM: Is It Possible?